Metadata-Version: 2.1
Name: omnikdataloggerproxy
Version: 1.2.4
Summary: Omnik Data Logger Proxy
Home-page: https://github.com/jbouwh/omnikdatalogger/tree/master/scripts/proxy
Author: Jan Bouwhuis
Author-email: jan@jbsoft.nl
License: gpl-3.0
Description: # OMNIKDATALOGGERPROXY
        ![omnikdatalogger](https://github.com/jbouwh/omnikdatalogger/workflows/omnikdatalogger/badge.svg)
        ![PyPI version](https://badge.fury.io/py/omnikdataloggerproxy.svg) 
        
        The `omnikdataloggerproxy.py` script and supporting files can be used intercept your inverters data messages. See the comments in the example shell script enand the config.ini example about how to use them.
        Good luck with them.
        The output can be processed with [omnikdatalogger](https://github.com/jbouwh/omnikdatalogger) for output to pvoutput, mqtt, influxdb and integration with Home Assistant.
        
        ## Install using pip
        `sudo pip3 install omnikdataloggerproxy`
        
        The supporting files are installed at the folder */usr/local/share/omnikdataloggerproxy/*
        
        ### Command line
        ```
        usage: omnikloggerproxy.py [-h] --serialnumber SERIALNUMBER [SERIALNUMBER ...]
                                   [--config FILE  Path to .yaml configuration file]
                                   [--section  Section to .yaml configuration file to use. Defaults to the first section found.]
                                   [--config FILE  Path to configuration file (ini) (DECREPATED!)]
                                   [--loglevel LOGLEVEL]
                                   [--listenaddress LISTENADDRESS]
                                   [--listenport LISTENPORT]
                                   [--omniklogger OMNIKLOGGER]
                                   [--omnikloggerport OMNIKLOGGERPORT]
                                   [--mqtt_host MQTT_HOST] [--mqtt_port MQTT_PORT]
                                   [--mqtt_retain MQTT_RETAIN]
                                   [--mqtt_discovery_prefix MQTT_DISCOVERY_PREFIX]
                                   [--mqtt_client_name_prefix MQTT_CLIENT_NAME_PREFIX]
                                   [--mqtt_username MQTT_USERNAME]
                                   [--mqtt_password MQTT_PASSWORD]
                                   [--mqtt_device_name MQTT_DEVICE_NAME]
                                   [--mqtt_logger_sensor_name MQTT_LOGGER_SENSOR_NAME]
        ```
        ### Configuration file
        The proxy parameters will fallback to the `config.ini` in the section `[proxy]`. Specify a configfile using the --config option.
        This way it easier tot run omnikdatalogger proxy as a docker container.
        > NOTE: The use of config.ini will be decrepated and config.yaml replaces config.ini.
        
        key | optional | type | default | description
        -- | --| -- | -- | --
        `serialnumber` | False | list | [] | List of serialnumbers of the inverters supported
        `loglevel` | True | string | `INFO` | The basic loglevel [DEBUG, INFO, WARNING, ERROR, CRITICAL]
        `listenaddress` | True | string | `127.0.0.1` | A local available address to listen to
        `listenport` | True | int | `10004` | The local port to listen to
        `omniklogger` | True | string | `176.58.117.69` | Forward to an address omnik/SolarmanPV datalogger server listens to. Set this to `176.58.117.69` as final forwarder.
        `listenport` | True | int | `10004` | The port the omnik/SolarmanPV datalogger server listens to.
        
        Comfig file settings will overrule the command line settings. The MQTT parameters will fallback to the settings in the section `output.mqtt:`. Specify a config file using the --settings (or --config) option.
        For details see the [Omnik Data Logger README.md](https://github.com/jbouwh/omnikdatalogger#mqtt_proxy-plugin-for-the-localproxy-client-in-the-section-clientlocalproxymqtt_proxy-of-appsyaml-or-configini)
        
        There are example config files included:
        - [`config.yaml_example.txt`](https://github.com/jbouwh/omnikdatalogger/blob/master/scripts/proxy/config.yaml_example.txt)
        - [`config.ini_example.txt`](https://github.com/jbouwh/omnikdatalogger/blob/master/scripts/proxy/config.ini_example.txt).
        
        ## Using Docker
        This directory contains all artefacts to run the `omnikdataloggerproxy` as a `Docker` container.
        
        You can use the included `Makefile` to build and push the `Docker` image yourself.
        
        ```
        $ make help
        help                           This help.
        build                          Build the Docker image. Use IMAGE_TAG to specify tag (default:latest)
        push                           Tag and push to Docker Hub
        login                          Login to Docker Hub
        ```
        
        **PS**: this is already advanced use ... I already build and pushed the image to [Docker Hub](https://hub.docker.com/r/jbouwh/omnikdataloggerproxy).
        
        ### Run the docker container
        
        The following command will pull the `Docker` image, mount the `config.ini` and create the `Docker` container.
        
        ```
        $ docker run --name omnikdataloggerproxy -d -v ${PWD}/config.ini:/config.ini -p 10004:10004 --name omnikdataloggerproxy jbouwh/omnikdataloggerproxy:latest
        ```
        
        I also added a `docker-compose.yml` that can be used. Run it at the folder where your `config.ini` file resites.
        
        So, doing exactly the same ... but using `docker-compose`:
        
        ```
        $ docker-compose -f /path/to/docker-compose.yml up -d
        ```
        
        
        ## Prearing to run omnikdataloggerproxy.py script (manual install)
        
        * Make sure you have shell access (ssh or telnet).
        * Install pip: `curl -k https://bootstrap.pypa.io/get-pip.py | python3` See: (https://stackoverflow.com/questions/47649902/installing-pip-on-a-dsm-synology)
        * Install the paho mqtt client: `/volume1/@appstore/py3k/usr/local/bin/pip3 install paho-mqtt`. The path may be diferent. I used a Synology DS218 play
        
        On upgrades it might be necessary to reinstall pip and paho-mqtt. Make sure you chack on this after an update for your Synology.
        
        Now take the following steps:
        * Place the omnikloggerproxy.py script, the bash script (omnikproxy_example_startup.sh) and `config.ini_example.txt` to a folder that will not be affected by upgrades. E.g. `/volume1/someshare/yourscriptfolder`.
        * Rename `config.ini_example.txt` to `config.ini` and configure settings.
        * check the commandline settings in the shell script.
        * Try to execute the script to test if it is working. (You can use task plannel later to start the script at boot automatically as activated task)
        * The lines to configure iptables should run as root. The omnikproxylogger script works at userlevel too.
        * On your internet router/gateway, set up a static route for `176.58.117.69/32` to your synology.
        * Configure MQTT to forward the data to be able to use the localproxy plugin with `hassapi` or `mqtt_proxy`.
        
        You can forward the logger trafic to the omnik servers, but if you rerouted yhe traffic for 176.58.117.69 you need to forward to a linux server elswere in the internet.
        
        ## Running omnikdataloggerproxy as a service on a Debian based system
        
        You can find the following sample config at `/usr/local/share/omnikdataloggerproxy/omnikdatalogggerproxy.config` after installing `pip3 install omnikdataloggerproxy` as root.
        
        ```ini
        [Unit]
        Description=Omnik datalogger proxy
        After=network.target
        [Service]
        Type=simple
        ExecStart=/usr/local/bin/omnikloggerproxy.py --serialnumber NLDN123456789012 --listenaddress 0.0.0.0 --omniklogger 176.58.117.69 --omnikloggerport 10004
        User=jbouwh
        Group=users
        Restart=on-failure
        RestartSec=30s
        [Install]
        WantedBy=multi-user.target
        ```
        The template service file shows a forwarding only setup.
        
        To setup omnikdatalogger proxy as root do:
        - Create a config folder and copy the sample service script:
          - `cd /etc/`
          - `mkdir omnikdataloggerproxy`
          - `cp /usr/local/share/omnikdataloggerproxy/omnikdatalogggerproxy.config .`
        - Update `User` and *serialnumber* in the script `omnikdatalogggerproxy.config` using your favorite editor.
          - `nano omnikdatalogggerproxy.config`
        - Link the script to systemd: to `ln -s /etc/omnikdataloggerproxy/omnikdatalogggerproxy.service /etc/systemd/system/omnikdatalogggerproxy.service`
        - Enable the service: `systemctl enable omnikdatalogggerproxy`
        - Start the service: `systemctl start omnikdatalogggerproxy`
        - check if the service is running: `systemctl status omnikdatalogggerproxy`
        
        After some time the logging should show something similar like this:
        ```
        # systemctl status omnikdataloggerproxy
        ● omnikdataloggerproxy.service - Omnik datalogger proxy
           Loaded: loaded (/etc/omnikdataloggerproxy/omnikdataloggerproxy.service; enabled; vendor preset: enabled)
           Active: active (running) since Sun 2020-06-21 13:33:21 CEST; 16min ago
         Main PID: 28182 (omnikloggerprox)
            Tasks: 4 (limit: 4915)
           Memory: 9.8M
           CGroup: /system.slice/omnikdataloggerproxy.service
                   └─28182 /usr/bin/python3 /usr/local/bin/omnikloggerproxy.py --serialnumber NLDN123456789012 --listenaddress 0.0.0.0 --omniklogger 176.58.117.69 --omnikloggerport 10004
        
        Jun 21 13:33:22 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Forwarding succesful.
        Jun 21 13:38:33 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Processing message for inverter 'NLDN123456789012'
        Jun 21 13:38:33 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: 2020-06-21 13:38:33.795477 Forwarding to omnik logger "176.58.117.69"
        Jun 21 13:38:33 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Forwarding succesful.
        Jun 21 13:43:38 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Processing message for inverter 'NLDN123456789012'
        Jun 21 13:43:38 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: 2020-06-21 13:43:38.937148 Forwarding to omnik logger "176.58.117.69"
        Jun 21 13:43:38 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Forwarding succesful.
        Jun 21 13:48:50 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Processing message for inverter 'NLDN123456789012'
        Jun 21 13:48:50 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: 2020-06-21 13:48:50.194599 Forwarding to omnik logger "176.58.117.69"
        Jun 21 13:48:50 alpha omnikloggerproxy.py[28182]: omnikloggerproxy: Forwarding succesful.
        ```
        The log shows when messages were forwarded.
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Topic :: Home Automation
Classifier: Programming Language :: Python :: 3.5
Classifier: License :: OSI Approved :: GNU General Public License v3 (GPLv3)
Classifier: Operating System :: OS Independent
Description-Content-Type: text/markdown
