Metadata-Version: 1.1
Name: h26x-extractor
Version: 0.4
Summary: Extract NAL units from H.264 bitstreams
Home-page: https://github.com/slhck/h26x-extractor
Author: Werner Robitza
Author-email: werner.robitza@gmail.com
License: MIT
Description: h26x-extractor
        ==============
        
        Author: Werner Robitza, with contributions from @chemag
        
        Extracts NAL units from H.264 bitstreams and decodes their type and
        content, if supported.
        
        **Note:** This is not a replacement for a proper tool like
        `h264bitstream <https://github.com/aizvorski/h264bitstream>`__.
        ``h26x-extractor`` is not fast and not robust, but rather a playground
        for parsing bitstreams. Use with caution!
        
        Installation
        ============
        
        Via pip:
        
        ::
        
           pip3 install h26x-extractor
        
        Status
        ======
        
        Currently supported:
        
        -  Parsing of H.264 bitstreams
        -  Parsing of NALU
        -  Parsing of AUD
        -  Parsing of CodedSliceIDR
        -  Parsing of CodedSliceNonIDR
        -  Parsing of SPS
        -  Parsing of PPS
        
        Currently planned:
        
        -  Parsing of SEI
        -  Parsing of VUI
        -  Parsing of H.265 bitstreams
        
        Usage
        =====
        
        ::
        
           h26x-extractor [options] <input-file>...
        
        You can pass the ``-v`` flag to enable verbose output, e.g. the
        following. You will get, for each NAL unit:
        
        -  The bye position range
        -  The offset from the start of the stream
        -  The overall length including start code
        -  The type (also translated in plaintext)
        -  Its content in raw bytes, encoded as hex
        -  Its RBSP content
        -  A table with its content decoded, if supported
        
        Example:
        
        ::
        
           NALU bytepos:   [0, 28]
           NALU offset:    0 Bytes
           NALU length:    29 Bytes (including start code)
           NALU type:      7 (Sequence parameter set)
           NALU bytes:     0x0000000167f4000d919b28283f6022000003000200000300641e28532c
           NALU RBSP:      0xf4000d919b28283f602200000002000000641e28532c
        
           SPS (payload size: 22.0 Bytes)
           +--------------------------------------+---------+
           | field                                | value   |
           +======================================+=========+
           | constraint_set0_flag                 | 0       |
           +--------------------------------------+---------+
           | constraint_set1_flag                 | 0       |
           +--------------------------------------+---------+
           ....
        
        Programmatic usage
        ==================
        
        You can also use this library in your code, e.g.:
        
        ::
        
           from h26x_extractor.h26x_parser import H26xParser
        
           H26xParser.set_callback("nalu", do_something)
           H26xParser.parse()
           def do_something(bytes):
             # do something with the NALU bytes
        
        Valid callbacks are:
        
        -  ``sps``
        -  ``pps``
        -  ``slice``
        -  ``aud``
        -  ``nalu``
        
        Raw data for all callbacks includes the RBSP.
        
        You can also call the ``nalutypes`` classes to decode the individual
        fields, e.g. ``nalutypes.SPS``.
        
        License
        =======
        
        The MIT License (MIT)
        
        Copyright (c) 2017-2020 Werner Robitza
        
        Permission is hereby granted, free of charge, to any person obtaining a
        copy of this software and associated documentation files (the
        “Software”), to deal in the Software without restriction, including
        without limitation the rights to use, copy, modify, merge, publish,
        distribute, sublicense, and/or sell copies of the Software, and to
        permit persons to whom the Software is furnished to do so, subject to
        the following conditions:
        
        The above copyright notice and this permission notice shall be included
        in all copies or substantial portions of the Software.
        
        THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
        OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
        MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
        IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
        CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
        TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
        SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
        
        
        Changelog
        =========
        
        v0.4 (2020-04-12)
        -----------------
        
        -  Bump version to 0.4.
        
        -  Update release script.
        
        -  Update readme.
        
        -  H26x_extractor: add deeper slice_header parsing (#4)
        
           Includes:
        
           -  passing the SPS and PPS NALUs to CodedSliceIDR and
              CodedSliceNonIDR (which need them to go further)
           -  adding an optional concept of order in the verbose printing, so
              that NALU parameters are printed in the order they are parsed
           -  implementing ordering in SPS, PPS, and CodedSliceIDR NALUs
           -  fix on the SPS parser based on profile_idc values, per 2016-02
              standard (Section 7.3.2.1.1, page 44). Note in particular that the
              if loop does not include value 144
           -  fix minor type
              (s/slice_gropu_change_rate_minus1/slice_group_change_rate_minus1/)
        
           Tested:
        
           ::
        
              $ h26x-extractor -v file.264
              ...
              SPS (payload size: 21.0 Bytes)
              +--------------------------------------+---------+
              | field                                | value   |
              +======================================+=========+
              | profile_idc                          | 66      |
              +--------------------------------------+---------+
              | constraint_set0_flag                 | 1       |
              +--------------------------------------+---------+
              | constraint_set1_flag                 | 1       |
              +--------------------------------------+---------+
              | constraint_set2_flag                 | 0       |
              +--------------------------------------+---------+
              | constraint_set3_flag                 | 0       |
              +--------------------------------------+---------+
              ...
              NALU type:  5 (Coded slice of an IDR picture)
              NALU bytes: 0x000000016588841afffffc2f14000416fd78e06380de6a1306bb224a722233e54ffa7cb9526c188ed1189699e7c6fd1a2307f757de5c3fca2f3d22b7fc667ccb6ff6b6a8dabb515b59fe53f8a7d83a8beb6ff17988adbfde818bdf2dafc5e7a2b5fde4a0bca4156137f8ceadff19bd5bfe233e152fbefbefbe2fab6dfe...
              NALU RBSP:  0x88841afffffc2f14000416fd78e06380de6a1306bb224a722233e54ffa7cb9526c188ed1189699e7c6fd1a2307f757de5c3fca2f3d22b7fc667ccb6ff6b6a8dabb515b59fe53f8a7d83a8beb6ff17988adbfde818bdf2dafc5e7a2b5fde4a0bca4156137f8ceadff19bd5bfe233e152fbefbefbe2fab6dfed6d62d6ad7...
        
              CodedSliceIDR (payload size: 4538.0 Bytes)
              +----------------------+---------+
              | field                | value   |
              +======================+=========+
              | first_mb_in_slice    | 0       |
              +----------------------+---------+
              | slice_type           | 7       |
              +----------------------+---------+
              | slice_type_clear     | I       |
              +----------------------+---------+
              | pic_parameter_set_id | 0       |
              +----------------------+---------+
              | frame_num            | 0       |
              +----------------------+---------+
              | idr_pic_id           | 0       |
              ...
        
        -  Fix offset-by-one (#3)
        
           -  h26x-extractor: add a simple parsing test
        
           Needed to refactor the parser constructor in order to allow testing
           binary blobs.
        
           Tested:
        
           Before the AUD fix patch:
        
           ::
        
              $ ./tests/simple_parsing.py
        
              ========================================================================================================
        
              NALU bytepos: [0, 5]
              NALU offset:  0 Bytes
              NALU length:  6 Bytes (including start code)
              NALU type:  9 (Access unit delimiter)
              NALU bytes: 0x000000010910
              NALU RBSP:
        
              E
              ======================================================================
              ERROR: testAUDParser (__main__.ParsingTest)
              Simple AUD parsing.
              ----------------------------------------------------------------------
              Traceback (most recent call last):
                File "./tests/simple_parsing.py", line 17, in testAUDParser
                  ex.parse()
                File "/usr/local/lib/python3.7/site-packages/h26x_extractor-0.3-py3.7.egg/h26x_extractor/h26x_parser.py", line 209, in parse
                  aud = nalutypes.AUD(rbsp_payload, self.verbose)
                File "/usr/local/lib/python3.7/site-packages/h26x_extractor-0.3-py3.7.egg/h26x_extractor/nalutypes.py", line 120, in __init__
                  self.primary_pic_type = self.s.read('uint:3')
                File "/usr/lib/python3.7/site-packages/bitstring.py", line 3902, in read
                  value, self._pos = self._readtoken(name, self._pos, length)
                File "/usr/lib/python3.7/site-packages/bitstring.py", line 2016, in _readtoken
                  "Tried to read {0} bits when only {1} available.".format(int(length), self.length - pos))
              bitstring.ReadError: Reading off the end of the data. Tried to read 3 bits when only 0 available.
        
              ----------------------------------------------------------------------
              Ran 1 test in 0.003s
        
              FAILED (errors=1)
        
           After the AUD fix patch:
        
           ::
        
              $ ./tests/simple_parsing.py
        
              ========================================================================================================
        
              NALU bytepos: [0, 5]
              NALU offset:  0 Bytes
              NALU length:  6 Bytes (including start code)
              NALU type:  9 (Access unit delimiter)
              NALU bytes: 0x000000010910
              NALU RBSP:  0x10
        
              AUD (payload size: 1.0 Bytes)
              +------------------+---------+
              | field            |   value |
              +==================+=========+
              | primary_pic_type |       0 |
              +------------------+---------+
              .
              ----------------------------------------------------------------------
              Ran 1 test in 0.001s
        
              OK
        
           -  h26x_extractor: fix offset-by-1 in NALU parser
        
           Tested:
        
           Before the AUD fix patch:
        
           ::
        
              $ ./tests/simple_parsing.py
        
              ========================================================================================================
        
              NALU bytepos: [0, 5]
              NALU offset:  0 Bytes
              NALU length:  6 Bytes (including start code)
              NALU type:  9 (Access unit delimiter)
              NALU bytes: 0x000000010910
              NALU RBSP:
        
              E
              ======================================================================
              ERROR: testAUDParser (__main__.ParsingTest)
              Simple AUD parsing.
              ----------------------------------------------------------------------
              Traceback (most recent call last):
                File "./tests/simple_parsing.py", line 17, in testAUDParser
                  ex.parse()
                File "/usr/local/lib/python3.7/site-packages/h26x_extractor-0.3-py3.7.egg/h26x_extractor/h26x_parser.py", line 209, in parse
                  aud = nalutypes.AUD(rbsp_payload, self.verbose)
                File "/usr/local/lib/python3.7/site-packages/h26x_extractor-0.3-py3.7.egg/h26x_extractor/nalutypes.py", line 120, in __init__
                  self.primary_pic_type = self.s.read('uint:3')
                File "/usr/lib/python3.7/site-packages/bitstring.py", line 3902, in read
                  value, self._pos = self._readtoken(name, self._pos, length)
                File "/usr/lib/python3.7/site-packages/bitstring.py", line 2016, in _readtoken
                  "Tried to read {0} bits when only {1} available.".format(int(length), self.length - pos))
              bitstring.ReadError: Reading off the end of the data. Tried to read 3 bits when only 0 available.
        
              ----------------------------------------------------------------------
              Ran 1 test in 0.003s
        
              FAILED (errors=1)
        
           After the AUD fix patch:
        
           ::
        
              $ ./tests/simple_parsing.py
        
              ========================================================================================================
        
              NALU bytepos: [0, 5]
              NALU offset:  0 Bytes
              NALU length:  6 Bytes (including start code)
              NALU type:  9 (Access unit delimiter)
              NALU bytes: 0x000000010910
              NALU RBSP:  0x10
        
              AUD (payload size: 1.0 Bytes)
              +------------------+---------+
              | field            |   value |
              +==================+=========+
              | primary_pic_type |       0 |
              +------------------+---------+
              .
              ----------------------------------------------------------------------
              Ran 1 test in 0.001s
        
              OK
        
        v0.3 (2020-03-15)
        -----------------
        
        -  Bump version to 0.3.
        
        -  Add release script.
        
        -  Python 3.7 and 3.8.
        
        -  Rename changelog.
        
        v0.2 (2017-08-02)
        -----------------
        
        -  Many updates.
        
        v0.1 (2017-07-17)
        -----------------
        
        -  Initial commit.
        
Keywords: video,h264
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: Topic :: Multimedia :: Video
Classifier: License :: OSI Approved :: MIT License
Classifier: Natural Language :: English
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
Classifier: Programming Language :: Python :: 3.6
Classifier: Programming Language :: Python :: 3.7
Classifier: Programming Language :: Python :: 3.8
