Metadata-Version: 2.1
Name: esphomeflasher
Version: 1.3.0
Summary: ESP8266/ESP32 firmware flasher for ESPHome
Home-page: https://github.com/esphome/esphome-flasher
Author: ESPHome
Author-email: contact@esphome.io
License: MIT
Download-URL: https://github.com/esphome/esphome-flasher/archive/1.3.0.zip
Description: # ESPHome-Flasher
        
        ESPHome-Flasher is a utility app for the [ESPHome](https://esphome.io/)
        framework and is designed to make flashing ESPs with ESPHome as simple as possible by:
        
         * Having pre-built binaries for most operating systems.
         * Hiding all non-essential options for flashing. All necessary options for flashing
           (bootloader, flash mode) are automatically extracted from the binary.
        
        This project was originally intended to be a simple command-line tool,
        but then I decided that a GUI would be nice. As I don't like writing graphical
        front end code, the GUI largely is based on the
        [NodeMCU PyFlasher](https://github.com/marcelstoer/nodemcu-pyflasher)
        project.
        
        The flashing process is done using the [esptool](https://github.com/espressif/esptool)
        library by espressif.
        
        ## Installation
        
        Es doesn't have to be installed, just double-click it and it'll start.
        Check the [releases section](https://github.com/esphome/esphome-flasher/releases)
        for downloads for your platform.
        
        ## Installation Using `pip`
        
        If you want to install this application from `pip`:
        
        - Install Python 3.x
        - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython` (see also linux notes below)
        - Install this project using `pip3 install esphomeflasher`
        - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface (
          type `esphomeflasher -h` for info)
        
        ## Build it yourself
        
        If you want to build this application yourself you need to:
        
        - Install Python 3.x
        - Install [wxPython 4.x](https://wxpython.org/) manually or run `pip3 install wxpython`
        - Download this project and run `pip3 install -e .` in the project's root.
        - Start the GUI using `esphomeflasher`. Alternatively, you can use the command line interface (
          type `esphomeflasher -h` for info)
        
        
        ## Linux Notes
        
        Installing wxpython for linux can be a bit challenging (especially when you don't want to install from source).
        You can use the following command to install a wxpython suitable with your OS:
        
        ```bash
        # Go to https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ and select the correct OS type
        # here, we assume ubuntu 18.03 bionic
        pip3 install -U \
            -f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-18.04 \
            wxPython
        ```
        
        ## License
        
        [MIT](http://opensource.org/licenses/MIT) © Marcel Stör, Otto Winter
        
Keywords: home,automation
Platform: any
Requires-Python: >=3.5,<4.0
Description-Content-Type: text/markdown
