Metadata-Version: 2.1
Name: rlc_chart
Version: 0.0.0
Summary: A library that renders impedance charts that include capacitance and inductance grids.
Home-page: https://nurdletech.com/linux-utilities/rlc_chart
Author: Ken Kundert
Author-email: rlc_chart@nurdletech.com
License: GPLv3+
Download-URL: https://github.com/kenkundert/rlc_chart/tarball/master
Description: RLC Chart
        ================
        
        .. not yet:
            .. image:: https://img.shields.io/pypi/v/rlc_chart.svg
                :target: https://pypi.python.org/pypi/rlc_chart
        
            .. image:: https://img.shields.io/pypi/pyversions/rlc_chart.svg
                :target: https://pypi.python.org/pypi/rlc_chart/
        
        :Author: Ken Kundert
        :Version: 0.0.0
        :Released: 2021-03-21
        
        What?
        -----
        
        *rlc_chart* is library that renders impedance charts in SVG with the normal
        impedance versus frequency log-log grids, but they also include capacitance and
        inductance grids.  They can be used to directly read component values from 
        a plot of impedance.
        
        Consider the impedance of a capacitor that has series resistance and inductance 
        parasitics along with a shunt resistor as represented by the following circuit:
        
        .. image:: figures/leaky-cap-schematic.svg
            :width: 25%
            :align: center
        
        .. image:: figures/leaky-cap-chart.svg
            :width: 100%
            :align: center
        
        You can use the various grids on this graph to determine the values of the 
        various components: C = 1 nF, L = 10 μH, Rs = 2 Ω, Rp = 500 kΩ, and f₀ = 1.6 
        MHz.  You can do this in other ways, but they involve manual calculation.  In 
        addition, an RLC chart is a convenient way of sharing or publishing your 
        findings.
        
        Using an RLC chart is often enough to allow you to build a linear model for 
        common two terminal components.
        
        
        How?
        ----
        
        Here is an example of how to use *rlc_chart*::
        
            from rlc_chart import RLC_Chart
            from math import log10 as log, pi as π
        
            fmin = 1
            fmax = 1e8
            zmin = 1
            zmax = 1e6
            mult = 10**((log(fmax) - log(fmin))/400)
            f = fmin
            freq = []
            impedance = []
            resistance = []
            reactance = []
        
            while(f <= 1.01*fmax):
                z1 = 2 + 1/(2j*π*f*1e-9) + 2j*π*f*10.0e-6
                z2 = 5e5
                z = z1 * z2 / (z1 + z2)
                freq += [f]
                impedance += [abs(z)]
                f *= mult
        
            with RLC_Chart('lcr-chart.svg', fmin, fmax, zmin, zmax) as chart:
                chart.add_trace(freq, impedance)
        
        Most of the code builds the two arrays that represent the trace.  The impedance 
        array is expected to contain real values.  In this case it is the magnitude that 
        is being plotted, though it is also common to call *add_trace* twice to show 
        both the real and imaginary parts of the impedance.
        
        If you use the *Spectre* circuit simulator, you can use *psf_utils* with 
        *rlc_chart* to extract models from simulation results. For example, here is the 
        model of an inductor given by its manufacturer::
        
            subckt MCFE1412TR47_JB (1 2)
                R1 (1 7) resistor  r=0.036
                L5 (2 8) inductor  l=20u
                C2 (7 8) capacitor c=10.6p
                R2 (8 2) resistor  r=528
                C1 (7 9) capacitor c=28.5p
                R5 (9 2) resistor  r=3.7
                L0 (7 3) inductor  l=0.27u
                L1 (3 4) inductor  l=0.07u
                L2 (4 2) inductor  l=0.11u
                L3 (3 5) inductor  l=0.39u
                L4 (4 6) inductor  l=0.35u
                R3 (5 4) resistor  r=3.02158381422266
                R4 (6 2) resistor  r=43.4532529473926
            ends MCFE1412TR47_JB
        
        This model is overly complicated and so expensive to simulate.  It requires 13 
        extra unknowns that the simulator must compute (7 internal nodes and 6 inductor 
        currents).  The impedance of this subcircuit is extracted by grounding one end 
        and driving the other with a 1 A magnitude AC source.  Then, the RLC chart for 
        this subcircuit can be generated with::
        
            from psf_utils import PSF
            from inform import Error, os_error, fatal
            from rlc_chart import RLC_Chart
        
            try:
                psf = PSF('MCFE1412TR47_JB.ac')
                sweep = psf.get_sweep()
                z_ckt = psf.get_signal('1')
                z_mod = psf.get_signal('2')
        
                with RLC_Chart('MCFE1412TR47_JB.svg', 100, 1e9, 0.01, 1000) as chart:
                    chart.add_trace(sweep.abscissa, abs(z_ckt.ordinate), stroke='red')
                    chart.add_trace(sweep.abscissa, abs(z_mod.ordinate), stroke='green')
        
                with RLC_Chart('MCFE1412TR47_JB.rxz.svg', 100, 1e9, 0.01, 1000) as chart:
                    chart.add_trace(sweep.abscissa, abs(z.ordinate.real), stroke='green')
                    chart.add_trace(sweep.abscissa, abs(z.ordinate.imag), stroke='orange')
                    chart.add_trace(sweep.abscissa, abs(z.ordinate.real), stroke='blue')
                    chart.add_trace(sweep.abscissa, abs(z.ordinate.imag), stroke='red')
        
            except Error as e:
                e.terminate()
            except OSError as e:
                fatal(os_error(e))
        
        The RLC chart shows that the above subcircuit can be replaced with::
        
            subckt MCFE1412TR47_JB (1 2)
                L   (2 2) inductor l=442.24nH r=36mOhm
                C   (2 2) capacitor c=27.522pF
                R   (2 2) resistor r=537.46_Ohm
            ends MCFE1412TR47_JB
        
        This version only requires one additional unknown, the inductor current.
        
        Here is the RLC chart of both showing the difference, which are inconsequential.
        
        .. image:: figures/MCFE1412TR47_JB.svg
            :width: 100%
            :align: center
        
        The differences are a bit more apparent if the real and imaginary components of 
        the impedance are plotted separately.
        
        .. image:: figures/MCFE1412TR47_JB.rxz.svg
            :width: 100%
            :align: center
        
        The differences are significant only in the loss exhibited above resonance, 
        which is usually not of concern.
        
        
        The Details
        -----------
        
        RLC_Chart
        """""""""
        
        The *RLC_Chart* class constructor takes the following required arguments:
        
        filename:
            Path to the output SVG file.
        
        *fmin*:
            The minimum frequency value (left-most value on the chart). This value is 
            always rounded down the next lower multiple of 10.  So for example, if you 
            give 25 Hz as *fmin*, then 10 Hz is used.
        
        *fmax*:
            The maximum frequency value (right-most value on the chart). This value is 
            always rounded up the next higher multiple of 10.  So for example, if you 
            give 75 MHz as *fmax*, then 100 MHz is used.
        
        *zmin*:
            The minimum impedance value (bottom-most value on the chart). This value is 
             always rounded down the next lower multiple of 10.  So for example, if you 
             give 150 mΩ *zmin*, then 100 mΩ is used.
        
        *zmax*:
            The maximum impedance value (top-most value on the chart). This value is 
            always rounded up the next higher multiple of 10.  So for example, if you 
            give 800 kΩ as *zmax*, then 1 MΩ is used.
        
        In addition, the following keyword arguments are optional.
        
        *axes*:
            Specifies which axes are desired, where the choices are *f* for frequency, 
            *z* for impedance, *c* for capacitance, and *l* for inductance.  *axes* is 
            a string that contains any or all of the four characters, or not at all.  If 
            the characters are lower case, then only the major grid lines are drawn, and 
            if given as upper case letters, both the major and minor grid lines are 
            drawn.  The visual clutter in the chart can be reduces by eliminating 
            unneeded grid lines.
        
        *trace_width*:
            The width of a trace. The default is 0.025 inches.
        
        *trace_color*:
            The default color of the trace.  You can use one of the named SVG colors, or 
            you can use 'rgb(R,G,B)' where *R*, *G*, and *B* are integers between 0 and 
            255 that specify the intensity of red, blue, and green components of the 
            color.
        
        *major_line_width*:
            The width of a major division line. The default is 0.01 inches.
        
        *minor_line_width*:
            The width of a minor division line. The default is 0.005 inches.
        
        *outline_line_width*:
            The width of grid outline. The default is 0.015 inches.
        
        *outline_line_color*:
            The color of the grid outline.  The default is 'black'.
        
        *fz_grid_color*:
            The color of the frequency and impedance grid lines.  The default is 'grey'.
        
        *cl_grid_color*:
            The color of the capacitance and inductance grid lines.  The default is 
            'grey'.
        
        *background*:
            The background color of the grid.  The default is 'white'.
        
        *minor_divs*:
            The minor divisions to include.  The default is '123456789'.  Other common 
            values are '1', '13', '125', and '12468'.
        
        *decade*:
            The size of one decade square.  The default is 1 inch. With this value, 
            a grid that is 6 decades wide and 4 decades high is 6" by 4".
        
        *left_margin*:
            The size of the left margin.  The default is 1 inch.
        
        *right_margin*:
            The size of the right margin.  The default is 1 inch.
        
        *top_margin*:
            The size of the top margin.  The default is 1 inch.
        
        *bottom_margin*:
            The size of the bottom margin.  The default is 1 inch.
        
        *font_family*:
            The text font family.  The default is "sans-serif".
        
        *font_size*:
            The text font size.  The default is 12.
        
        *text_color*:
            The text color size.  The default is "black".
        
        *text_offset*:
            The separation between the axis labels and the grid. The default is 0.15 
            inches.
        
        *pixels_per_unit*:
            This is a scaling factor that allows you specify your dimensions to what 
            every units you wish.  A value of 96, the default, means that you are 
            specifying your units in inches.  A value of 37.8 allows you specify values 
            in centimeters. Etc.
        
        In addition, many SVG parameters can be passed into *RLC_Chart*, in which case 
        they are simple passed on to *svgwrite*.
        
        Generally, *RLC_Chart* is the argument of a *with* statement. If you choose not 
        to do this, then you must explicitly call the *close* method yourself.  Other 
        than *close*, *RLC_Chart* provides one other method: *add_trace*.
        
        add_trace()
        """""""""""
        
        This method adds a trace to the graph. It may be called multiple times to add 
        additional traces. There are two required arguments:
        
        *frequency*:
            An array of real values representing the frequency values of the points that 
            when connected make up the trace.
        
        *impedance*:
            An array of real values representing the impedance values of the points that 
            when connected make up the trace.
        
        Each of these arrays can be in the form of a *Python* list or a *numpy* array, 
        and they must be the same length.
        
        It is also possible to specify additional keyword aruments, which are passed on 
        to *svgwrite* and attached to the trace. This can be used to specify trace color 
        and style. For example, specify *stroke* to specify the trace color.
        
        
        Labeling
        ========
        
        The chart object returned by *RLC_Chart* is a *svgwrite* *Drawing* object, and 
        so you can call its methods to add SVG features to your chart.  This can be used 
        to add labels to your charts.  Here is an example that demonstrates how to add 
        labels::
        
            from rlc_chart import RLC_Chart
            from inform import fatal, os_error
            from pathlib import Path
            import csv
        
            fmin = 100
            fmax = 10e9
            zmin = 0.01
            zmax = 1e6
        
            frequency = []
            impedance = []
            ESR = []
            try:
                contents = Path('C0603C102K3GACTU_imp_esr.csv').read_text()
                data = csv.DictReader(contents.splitlines(), delimiter=',')
                for row in data:
                    frequency.append(float(row['Frequency']))
                    impedance.append(float(row['Impedance']))
                    ESR.append(float(row['ESR']))
        
                with RLC_Chart('C0603C102K3GACTU.svg', fmin, fmax, zmin, zmax, axes='FZCL') as chart:
                    chart.add_trace(frequency, impedance, stroke='red')
                    chart.add_trace(frequency, ESR, stroke='blue')
        
                    chart.add(chart.text(
                        "1 nF",
                        insert = (chart.to_x(150_000), chart.to_y(1_500)),
                        font_size = 24,
                        fill = 'black'
                    ))
                    chart.add(chart.text(
                        "700 pH",
                        insert = (chart.to_x(2_000_000_000), chart.to_y(10)),
                        font_size = 24,
                        fill = 'black',
                        text_anchor = 'end',
                    ))
                    chart.add(chart.text(
                        "20 mΩ",
                        insert = (chart.to_x(175_000_000), chart.to_y(0.012)),
                        font_size = 24,
                        fill = 'black',
                        text_anchor = 'middle',
                    ))
                    chart.add(chart.text(
                        "C0603C102K3GACTU",
                        insert = (chart.WIDTH/2, 36),
                        font_size = 24,
                        fill = 'black',
                        text_anchor = 'middle',
                    ))
            except OSError as e:
                fatal(os_error(e))
        
        This example demonstrates two different ways to specify the location of the 
        label.  The *chart* object provides the *to_x* and *to_y* methods that convert 
        data values into coordinates within the grid.  This is used to add labels on the 
        traces.  The *chart* object also provides the *HEIGHT* and *WIDTH* attributes.  
        These can be used to compute coordinates within the entire canvas. This is used 
        to add a title that is near the top.
        
        .. image:: figures/C0603C102K3GACTU.svg
            :width: 100%
            :align: center
        
        
Platform: UNKNOWN
Requires-Python: >=3.6
Description-Content-Type: text/x-rst
