Metadata-Version: 2.1
Name: RPi.PIR
Version: 0.4.0
Summary: PIR sensor state monitor
Home-page: https://github.com/ricco386/RPi.PIR
Author: Richard von Kellner
Author-email: richard.kellner@gmail.com
License: MIT
Description: RPi.PIR
        #######
        
        PIR sensor state monitor, completely written in Python.
        
        RPi.PIR is using PIR sensor with Raspberry Pi GPIO.
        
        To connect to Raspberry Pi plug PIR into `GPIO PIN 23 <https://pinout.xyz/pinout/pin16_gpio23#>`_ (Physical pin 16)
        and POWER PIN. Install and execute raspi-pir and it should work. Alternatively you can user different PIN and execute
        raspi-pir with parameter: ``raspi-pir --pin pin_number``.
        
        .. image:: doc/RPi.PIR.png
        
        RPi.PIR supports number of parameters and also configuration file. For more details see ``raspi-pir --help`` or sample
        config.
        
        Sensor is based on `RPi.Sensor <https://github.com/ricco386/RPi.Sensor/>`__ library, which make base for implementing
        different types of sensors in Python.
        
        Pre-Installation requirements
        -----------------------------
        
        - Update system and install required dependencies::
        
            sudo apt-get update
        
        - Update system and install required dependencies::
        
            sudo apt-get install build-essential python3-dev python3-pip
        
        
        Installation
        ------------
        
        - Install the latest released version using pip::
        
            pip install https://github.com/ricco386/RPi.PIR/zipball/master
        
        - Alternatively install latest released version from pypi::
        
            pip install --upgrade RPi.PIR
        
        
        Integration as a systemd service
        --------------------------------
        
        - Make sure all dependencies (listed below) are installed (done automatically when installing via pip)
        - The ``raspi-pir`` command should be installed somewhere in your ``PATH`` (done automatically when installing via pip), make sure `raspi-pir.service` has corect path in `ExecStart` set to `raspi-pir` executable.
        - Systemd scripts are available: https://github.com/ricco386/RPi.PIR/tree/master/init.d to install them you will need root privileges, so we execute them as sudo::
        
            sudo cp init.d/raspi-pir.conf /etc/tmpfiles.d/
            sudo cp init.d/raspi-pir.service /etc/systemd/system/
            sudo systemd-tmpfiles --create /etc/tmpfiles.d/raspi-pir.conf
            sudo systemctl enable raspi-pir.service  # Enable service to start at system boot
            sudo systemctl start raspi-pir.service  # Start
        
        Systemd scripts should be run under **default Raspberry Pi user** (pi), scripts have to be able access GPIO.
        
        **Dependencies:**
        
        - `RPi.Sensor <https://pypi.python.org/pypi/RPi.Sensor>`_ (0.5.3+)
        
        
        Usage
        -----
        
        You have to create a `.sensor.cfg` file and place into `/home/pi/.sensor.cfg` you can find example file in RPi.Sensor repo: https://github.com/ricco386/RPi.Sensor/blob/master/raspi_sensor/sensor.cfg.example and create section `[PIR]` where you can override default values.
        
        `raspi-pir` also support parameters to overwrite config parameters. For more info run::
        
            raspi-pir --help
        
        
        Zabbix support
        --------------
        
        In directory `zabbix_template` there is a Zabbix template that can be imported to Zabbix and monitor systemd process if it is running and how much memory it consumes. It also supports Zabbix trapper `rpi.pir-state` that can receive a sensor state changes.
        
        
        License
        -------
        
        For more information see the `LICENSE <https://github.com/ricco386/RPi.PIR/blob/master/LICENSE>`_ file.
        
Platform: UNKNOWN
Classifier: Environment :: Console
Classifier: Intended Audience :: System Administrators
Classifier: Intended Audience :: Developers
Classifier: Intended Audience :: End Users/Desktop
Classifier: Operating System :: Unix
Classifier: Operating System :: POSIX :: Linux
Classifier: License :: OSI Approved :: MIT License
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 3
Classifier: Development Status :: 4 - Beta
Classifier: Topic :: Utilities
Classifier: Topic :: Home Automation
Classifier: Topic :: System :: Hardware
Classifier: Topic :: Terminals
Description-Content-Type: text/x-rst
