Metadata-Version: 2.1
Name: bflb-iot-tool
Version: 1.8.3
Summary: Bouffalolab Iot Tool
Home-page: https://pypi.org/project/bflb-iot-tool/
Author: bouffalolab
Author-email: jxtan@bouffalolab.com
License: MIT
Description: 
        ## Bouffalolab Iot Command Tool
        ====================================
        
        The functions of bflb_iot_tool is the same as DevCube(IOT View) which is a GUI tool for image programing.
        bflb_iot_tool is designed for the convenience of integrating into the compilation system after image buid,
        and making it more easy for users who are accustomed to using command line operations.
        
        ### basic download config:
        
        * --chipname：mandatory, name of chip(bl602/bl702/bl616...)
        * --interface：1.uart, 2.jlink, 3.cklink, 4.openocd, default is uart
        * --port：serial port or jlink serial number
        * --baudrate：baudrate of serial port, default is 115200
        * --xtal：xtal on the board, for bl602,1:24M,2:32M,3:38.4M,4:40M(default value when not specified),5:26M; for bl702,1:32M(default value when not specified); for bl616,just use value 7(auto adjust)
        * --config：eflash loader configuration file, default is chips/blXXXX/eflash_loader/eflash_loader_cfg.ini
        * --ota：dir of ota file, default is chips/blXXXX/ota
        
        ### files for download:
        
        1.scattered files:
        * --firmware：mandatory, select the firmware binary file which your sdk build out
        * --dts：optional, select the device tree file you used
        * --pt：mandatory, partition table of flash, default is located in chips/chipname/partition
        * --boot2：mandatory,boot2 binary file as bootloader, default is located in chips/chipname/builtin_imgs/boot2_isp_xxxxx
        * --mfg：optional, mfg binary file, only use when do RF test
        * --romfs：optional, romfs dir to create romfs.bin
        
        2.one whole image file:
        * --addr：address to program, default is 0
        * --single：the single file to be programmed, the tool will add nothing for this file
        
        ### other options:
        
        * --build：build image only,not program into flash
        * --key：aes encrypt key
        * --iv：aes encrypt iv
        * --pk：ecc sign public key
        * --sk: ecc sign private key
        
        ### EXAMPLE:
        * bflb_iot_tool.exe --chipname=bl602 --port=COM28 --baudrate=2000000 --firmware="helloworld_bl602.bin" --pt="chips/bl602/partition/partition_cfg_2M.toml" --dts="chips/bl602/device_tree/bl_factory_params_IoTKitA_40M.dts"
        * bflb_iot_tool.exe --chipname=bl602 --port=COM28 --baudrate=2000000 --firmware="helloworld_bl602.bin" --pt="chips/bl602/partition/partition_cfg_2M.toml" --dts="chips/bl602/device_tree/bl_factory_params_IoTKitA_40M.dts" --build
        * bflb_iot_tool.exe --chipname=bl602 --port=COM28 --baudrate=2000000 --addr=0x0 --firmware="helloworld_bl602.bin" --single
        
Platform: UNKNOWN
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: MIT License
Classifier: Operating System :: MacOS
Classifier: Operating System :: Microsoft
Classifier: Operating System :: Unix
Classifier: Environment :: Console
Classifier: Topic :: Software Development :: Libraries :: Python Modules
Classifier: Programming Language :: Python :: 3
Requires-Python: >=3.6
Description-Content-Type: text/markdown
